[Cm13] Station Class-2 - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
13
FUNCTION:
The features for each station are to be designated by assigning Station Class-2 for each station number.
PRECAUTION:
(1) When assigning Station Class-2 to a Multiline Terminal by this command, enter
"X-XXXXXXXX (My Line number)" of FX-FXXXXXXXX, which is assigned by CM10 Y=00,
as the first data.
(2) When a station has been set as an FAX station (CM13 Y=07), the following limitations are applied
to that station.
• Periodic Time Indication tone is not given to the line.
• Override by other stations is restricted.
• Ringing interval is fixed to 1 second ON-2 seconds OFF.
• Call Waiting Answer-Called Side to be restricted by CM15 Y=044: 0.
(3) After setting CM13 Y=32, 33, 63, blade reset is required.
(4) When 2 Paging equipment are connected to a PGD(2)-U10 ADP, the setting of Dual port mode is
required as with Analog Port Adapter (related command: CM13 Y=32/33/34).
(5) The data for a Single Line station number, My Line number of a Multiline Terminal and Virtual
Line station number are shown in the table below.
STATION NUMBER
Single Line station number
(Assigned by CM10 Y=00)
Multiline Terminal My Line
number (Assigned by CM10
Y=00, 01)
Virtual Line station number
(Assigned by CM11)
STATION CLASS-2
Y
00 01 02 03 04 05 06 07 08 09 10 11 12 13 18 21 22 23 24 25 29 32 33
           –       –   – –
        –   –   –        
– – – – – – –  – – –    –  – – – – – – –
3-178
: To assign –: Not assigned
Continued on next page
NWA-033623-001 Rev.8.1
CM13
91ch3002.fm
JULY/17/2009