NEC UNIVERGE SV8300 Command Manual page 312

COMMAND CODE
2B
DATA TABLE:
Y
No. MEANING
00 Authorization
Code per station
IP Station regis-
tration password
for Protected
Login Mode
Station Digest
Authentication
password
Standard SIP
Station registra-
tion password
NOTE 1: When the default is set to "NONE", the password is set to "0000".
NOTE 2: After assigning this command while SIP server is operating, be sure to report changing the SIP server
assigned by CM1D Y=33 second data "1".
NOTE 3:
The number of digits of the second data depends on the setting of CM42>73.
NOTE 4: To let the Standard SIP station function when no data is set for a digest authentication (such as conduct-
ing test operation by maintenance personnel), set "0000" (4 digits) as a password regardless of the set-
ting of CM42>73.
NOTE 5: The setting of Standard SIP station number is not available when originating/terminating a call or dur-
ing a call ("WAIT, BUSY NOW" is displayed).
NOTE 6: Be sure to reset Standard SIP station when this data setting is changed.
TITLE:
AUTHORIZATION CODE PER STATION/IP STATION PASSWORD ASSIGNMENT/
STATION DIGEST AUTHENTICATION PASSWORD ASSIGNMENT/STANDARD SIP
STATION REGISTRATION PASSWORD ASSIGNMENT/VoIP ENCRYPTION
PASSWORD ASSIGNMENT
1ST DATA
DATA MEANING
X Station number
(Maximum 8
XXXXXXXX digits)
2ND DATA
DATA
X Authorization Code
(Maximum 8 digits)
XXXXXXXX X: 0-9, A (*), B (#)
CCC Clear
NONE No data
X Password
(Maximum 8 digits)
XXXXXXXX X: 0-9, A (*), B (#)
NONE No data
X Password
(Maximum 8 digits)
XXXXXXXX X: 0-9, A (*), B (#)
NONE No data
X Password
(Maximum 8 digits)
XXXXXXXX X: 0-9, A (*), B (#)
NONE No data
3-256
RELATED
COMMAND
MEANING
CM08>513
CM15 Y=480
Continued on next page
NWA-033623-001 Rev.8.1
JANUARY/31/2012
CM2B
: Default
91ch3003.fm