[Cme9] Password - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
E9
FUNCTION:
This command is used to define the Password of each Password Level and the availability of Password
Service.
PRECAUTION:
(1) When programming a Password, the Password for Password Level 7 must be set. If no Password
of Password Level 7 is set, the programming of Password Service provision (CME9>9) is restricted
with the message "CODE NOT USED".
(2) Before setting the Password, CME9>8 (Change of Password) must be set to 0 (Allowed).
(3) CME9>9 (Password Service) must be set to 0 (Provided) after programming of all Passwords are
completed.
ASSIGNMENT PROCEDURE:
ST + E9 + DE +
DATA TABLE:
1ST DATA
0 Password Level 0
7 Password Level 7
8 Change of Password
9 Password Service
NOTE:
Password Level 7 can access all commands.
PASSWORD
1ST DATA 2ND DATA
+ DE +
(1 digit) (1/8 digits)
DATA
X
XXXXXXXX
CCC
NONE
0
1
0
1
NOTE
+ EXE
2ND DATA
MEANING
Password
(Maximum 8 digits)
Password clear
No data
Allowed
Restricted
Provide
No provided
3-662
: Default
REMARKS
Following Passwords are not
available:
"CC...C" (All "C")
"FF...F" (All "F")
NWA-033623-001 Rev.8.1
APRIL/16/2010
CME9
91ch3008.fm