[Cmba] Sip Profile Data - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
BA
FUNCTION:
This command is used to assign the various profile data for SIP Trunk.
PRECAUTION:
(1) Profile No. for control packet is assigned by CMA7 Y=71.
(2) When entering data with characters, the following characters can be registered;
Alphabet upper case (A-Z), alphabet lower case (a-z), numeric (0-9), symbol (! " # $ % & ' ( ) + ,
; < = > ? @ [ ] ^ _ ' { } ~), Space, hyphen (-), period (.), slash (/), colon (:)
NOTE: The character "CCC" cannot be registered.
ASSIGNMENT PROCEDURE:
+ + DE
ST BAYY/YYY
DATA TABLE:
Y=04-47
Y
No. MEANING
04 TOS/Diffserv Prece-
dence for SIP trunk
control packet
TOS: Type of Service
NOTE 1: The higher number has higher priority.
NOTE 2:
This data is recommended to set to "5". Consult with network manager when this data is changed.
NOTE 3: Set CMBA Y=10 to provide Diffserv QoS.
SIP PROFILE DATA
1ST DATA
+
(Profile No. 00-31)
1ST DATA
DATA MEANING
00 Profile number
for control packet
31
RESET
2ND DATA
+ +
DE
(1-32 digits)
2ND DATA
DATA
00 PRECEDENCE 0
07 PRECEDENCE 7
15 PRECEDENCE 0
3-611
+
EXE
: Default
RELATED
COMMAND
MEANING
CM35 Y=134
CMA7 Y=71
CMBA Y=10
Continued on next page
NWA-033623-001 Rev.8.1
APRIL/16/2010
CMBA
91ch3007.fm