NEC UNIVERGE SV8300 Command Manual page 363

COMMAND CODE TITLE:
35
Y
No. MEANING
169 Sending Switch Hook Flash
for Adjunct Analog System
170 DID Development Table
NOTE: For SIP trunk, this data is available only for the Development Table 1.
171 Number of digits to be con-
verted on DID for Develop-
ment Table 1
NOTE 1:
The number of digits set by this command on DID incoming number is converted by CM76 Y=90. DID
number conversion is started from the last digit of the received number.
(ex.) Received number is 050-1234-5678
- When 2nd data is set to NONE, 5678 is developed by CM76.
- When 2nd data is set to 08, 12345678 is developed.
NOTE 2:
This data is effective when CM35 Y=18 and CM35 Y=170 is set to 0.
NOTE 3: When DID number is displayed on LCD of Multiline Terminal or Attendant Console, only the last 4
digits are displayed.
172 Number of digits to be
received for Development
Table 1
173 Call Forwarding-All Calls
on Attendant Overflow
[8300R2]
174 CID Call Routing for non-
DID on ISDN, Caller ID
186 Alternate Routing for IPT
(P2P CCIS)/SIP
TRUNK ROUTE DATA
DATA
0 To send
1 Not sent
0 Development Table 1
3 Development Table 0
01-08 1-8 digits
15 4 digits
01-14 1-14 digits
15 4 digits
0 Available
1 Not available
0 To provide (Using Development Pattern 0)
1 To provide (Using Development Pattern 1)
2 To provide (Using Development Pattern 2)
3 Not provided
0 To provide
1 Not provided
SETTING DATA
MEANING
3-307
CM35
: Default
RELATED
COMMAND
CM76 Y=00, 90
CM35 Y=170
CM76 Y=90
CM35 Y=170
CM76 Y=90
CM08>067
CM35 Y=074
CM41 Y=0>01
CM51 Y=31
CM2A Y=50-52
CM8A
CM35 Y=192
Continued on next page
NWA-033623-001 Rev.8.1
91ch3003.fm
JANUARY/31/2012