NEC UNIVERGE SV8300 Command Manual page 733

COMMAND CODE TITLE:
EA
Fault Information Display
After the following operation:
ST + EA0 + DE
The fault information is displayed on PCPro/CAT. An example of fault information display is provid-
ed below:
EA0 + DE
0 + DE
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
+ 00 + DE
CAT mode
ST COMMAND=
EA0>_
EA0>0: XXXXXXXXXXXXXXXX-
S EA0>1: XXXXXXXXXXXXXXXX-
S EA0>2: XXXXXXXXXXXXXXXX-
S EA0>3: XXXXXXXXXXXXXXXX-
S EA0>4: XXXXXXXXXXXXXXXX-
S EA0>5: XXXXXXXXXXXXXXXX-
S EA0>6: XXXXXXXXXXXXXXXX-
S EA0>7: XXXXXXXXXXXXXXXX-
S EA0>8: XXXXXXXXXXXXXXXX-
S EA0>9: XXXXXXXXXXXXXXXX-
EA0>0: XXXXXXXXXXXXXXXX-
For details of (1), (2), see next page.
Fault Information 0
Fault Information 1
Fault Information 2
Fault Information 3
Fault Information 4
Fault Information 5
Fault Information 6
Fault Information 7
Fault Information 8
Fault Information 9
(1) (2)
3-677
CMEA
NWA-033623-001 Rev.8.1
91ch3008.fm
JULY/18/2008