NEC UNIVERGE SV8300 Command Manual page 274

COMMAND CODE TITLE:
18
Y
No. MEANING
2 Secretary station
Secretary station should
be Pilot station.
Operation:
A B C
Call terminated
(Pilot station)
NOTE: If an incoming call terminated to a Station Hunting group has encountered all line busy, the call is routed
to a designated station. This station is called "Secretary station".
3 Display of station num-
bers included in Station
Hunting group
(Display only)
NOTE: In CAT mode, the displaying station number is added 1 with every press of the S (Step forward) key regard-
less of the Station Hunting group. In Command Mode of PCPro, the next station number in the Station
Hunting group is displayed with every press of S (Step forward) key.
STATION HUNTING GROUP
STATION NUMBER (A)
DATA
X Secretary station number
XXXXXXXX
The correspondence between Serial numbers and Secretary station numbers is set by
CM19.
The data can be set only to Pilot stations, and thus cannot be set to any of the member
D
stations.
X Station number (A)
XXXXXXXX
MEANING DATA
XXXXXXXX
3-218
SETTING DATA
MEANING
00 Secretary station serial
numbers
30
31 Not assigned
X Station number (B)
(Display only)
NWA-033623-001 Rev.8.1
CM18
: Default
91ch3002.fm
JUNE/15/2011