NEC UNIVERGE SV8300 Command Manual page 92

COMMAND CODE TITLE:
08
085 Type of PS/Standard SIP station No-Answer timer
088 Home PBX Numbering Plan for WCS Roaming
[For PCS] [8300R2]
090 Loop on control after dialing for tandem connection, when the
incoming trunk cannot receive a release signal
094 Paging access tone sent to station
095 Hook flash (break pulse) sent to Radio Paging equipment from
station
096 Hook flash (break pulse) sent to Voice Paging equipment from
station
BASIC SERVICES
BASIC SERVICE
0 As per CM41 Y=0>86
1 As per CM41 Y=0>01
0 Closed Numbering System
1 Open Numbering System
0 Loop on is not provided (Loop on is
provided after an answer signal is
detected)
1 Loop on is provided
0 To send
1 Not sent
0 To send
1 Not sent
0 To send
1 Not sent
3-36
: Default
SETTING DATA
Continued on next page
NWA-033623-001 Rev.8.1
91ch3001.fm
JANUARY/31/2012
CM08