Error Messages - NEC UNIVERGE SV8300 Command Manual

ERROR MESSAGES

When an operation is incorrect, or wrong data is entered, an error message is displayed on the LCD. Error
messages and their meanings are shown below.
ERROR MESSAGE
CM DIGIT ERROR [0]/
DIGIT ERROR [0]
NOTE
FD DIGIT ERROR [0]/
DIGIT ERROR [0]
NOTE
SD DIGIT ERROR [0]/
DIGIT ERROR [0]
NOTE
FD DATA ERROR [0]/
DATA ERROR [0]
NOTE
SD DATA ERROR [0]/
DATA ERROR [0]
NOTE
CM CODE NOT
ALLOWED/CODE
NOT ALLOWED
NOTE
FD CODE NOT
ALLOWED/CODE
NOT ALLOWED
NOTE
Error Messages
MEANING OF MESSAGE
Error in the number of digits of the
command code entered.
Error in the number of digits of the
first data entered.
Error in the number of digits of the
second data entered.
The value of the first data entered is
incorrect.
The value of the second data entered
is incorrect.
Command which is not allowed in
the current status (for example, the
message is displayed when executing
CM00 in online status).
First data which is not allowed in the
current status.
Depress "ST" or "CE" and enter the
correct data.
Check whether the command is avail-
able or not.
Check whether the first data is avail-
able or not.
1-28
Chapter 1 HOW TO USE CAT
ERROR MESSAGES
ACTION
Continued on next page
NWA-033623-001 Rev.8.1
91ch1001.fm