NEC UNIVERGE SV8300 Command Manual page 163

COMMAND CODE TITLE:
0B
Y
No. MEANING
1XX 1 : VOIP Port
XX: Unit No. (01-50)
LAN DATA ASSIGNMENT
1ST DATA
DATA MEANING
66 Valid duration of the first
query to a DNS server
NOTE 1: This data setting makes the first query from a SIP trunk to a DNS server
effective.
NOTE 2: This data is not effective in the following version. In that case, a valid
duration of this data is fixed in 1 minute.
- 8300R2 version 9
- 8300R3 version 3 or later
NOTE 3:
When a DNS server is used in a version except the above version, this
data must be set to "0001".
NOTE 4: This data setting is invalid when the second data of CMBA Y=25 is set
to "1".
NOTE 5: When the setting of this command is changed, the DNS cache table
should be cleared by CMBA Y=99.
70 Global IP Address for
VoIPDB of Remote Unit
of Remote UNIT over IP
when VoIPDB is con-
trolled by NAT
NOTE 1:
This data cannot be entered by CAT when using 8300R1 software.
NOTE 2: When setting the Global IP address by this data, a period (.) must be
entered between the numbers (example: 255.255.255.254).
NOTE 3: When only one SIP trunk carrier is used, set Global IP address by
CM0B Y=1XX>70.
When Multi-SIP trunk carrier service is used, set Global IP address by
CMBA Y=139.
2ND DATA
DATA
0001 1 minute
1440 1440 minutes
RESET
NONE 60 minutes
XXX.XX Global IP Address for
...X VoIPDB
(Maximum 15 digits)
XXX.XXX.XXX.XXX=
0.0.0.1-255.255.255.254
NONE No data
RESET
3-107
COMMAND
MEANING
CM0B
(1 minute increments) Y=1XX>60,
61
CMBA
Y=25, 99
CMBA
Y=139
Continued on next page
NWA-033623-001 Rev.8.1
CM0B
: Default
RELATED
91ch3001.fm
JANUARY/31/2012