NEC UNIVERGE SV8300 Command Manual page 557

COMMAND CODE TITLE:
77
Y
No. MEANING
B DESKCON Name
assignment with
character
(for English)
[8300R2]
D Station Name assign-
ment with character
(for Simplified
Chinese)
[8300R7]
NOTE 4
E Station Name assign-
ment with character
(for Traditional
Chinese)
[8300R7]
NOTE 4
NOTE 1: The available English characters for assigning are as follows.
- For PCPro: 0-9, A-Z
- For CAT : 0-9, A-F
NOTE 2: Station name assignment is also available in each Multiline Terminal or Attendant Console
by using the access code assigned by CM20 Y=0-3: A110.
NOTE 3: Trunk names are assigned on a trunk route basis only.
NOTE 4: This data can be assigned by PCPro, not by CAT.
STATION/TRUNK ROUTE/ZT/DESKCON NAME ASSIGNMENT
STATION No./TRUNK
ROUTE NAME No./
ZT No./DESKCON No.
0-7: DESKCON number
assigned by CM10
X-XXXXXXXX: Station
Number
assigned by
CM10
X-XXXXXXXX: Station
Number
assigned by
CM10
SETTING DATA
DATA MEANING
X Character
(Maximum 16 char-
X......X acters)
NONE No data
X Calling Party Name
Character by PCPro
X......X (Maximum 8 charac-
ters)
NONE No data
X Calling Party Name
Character by PCPro
X......X (Maximum 8 charac-
ters)
NONE No data
3-501
CM77
: Default
REMARKS
CM77 Y=4, 5
CM77 Y=4, 5
Continued on next page
NWA-033623-001 Rev.8.1
91ch3005.fm
JANUARY/31/2012