[Cm56] Paging Group/Intercom Group - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
56
FUNCTION:
This command is used to assign the Multiline Terminal/Soft Phone station number for Automatic/
Manual/Dial Intercom and Internal Zone Paging.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
ST + 56YY + DE
DATA TABLE:
Y
No. MEANING
00 Internal Zone Paging
Group 0
07
Internal Zone Paging
Group 7
NOTE 1
NOTE 2
NOTE 1: The maximum number of Internal Zone Paging Group per system is as follows.
- A maximum of 8 zone (CM56 Y=00-07) Internal Zone Paging Group are available for In-
ternal Zone Paging access.
- A maximum of 6 zone (CM56 Y=00-05) Internal Zone Paging Group are available for All
Zone Internal Paging.
NOTE 2: A maximum of 16 Multiline Terminals (Serial number within the group 00-15) can be as-
signed for each Internal Zone Paging Group. A Multiline Terminal can be assigned for mul-
tiple Internal Zone Paging Groups.
PAGING GROUP/INTERCOM GROUP
SERIAL No. INTERCOM No.
+
(2 digits) (4 digits)
INTERCOM No./
SERIAL No.
00-15: Serial number
within the group
DATA
+ DE +
(1-8 digits)
SETTING DATA
DATA MEANING
X My Line number of
Multiline Terminal
XXXXXXXX
NONE No data
3-425
CM56
+ EXE
: Default
RELATED
COMMAND
CM08>158
CM15 Y=049
CM20 Y=0-3:
A130-A145, A164
CM90 Y=00:
F1270-F1277,
F1299
Continued on next page
NWA-033623-001 Rev.8.1
91ch3005.fm
JANUARY/31/2012