[Cm67] Location Data Assignment - NEC UNIVERGE SV8300 Command Manual

CM67
COMMAND CODE TITLE:
LOCATION DATA ASSIGNMENT
67
FUNCTION:
This command is used to assign the location data to the location number set by CM12 Y=39/50 (Peer-
to-Peer connection by IP Station), CM8A Y=5000-5255: 173 (Peer-to-Peer connection via CCIS).
The location number is used for administration of the location via IP network and can be assigned to
each connection type or each location which is divided according to the network traffic.
PRECAUTION:
The first data of CM67 Y=00-06 must be set both on own office and opposite office.
ASSIGNMENT PROCEDURE:
1ST DATA 2 ND DATA
ST + 67YY + DE + + DE + + EXE
(2/4 digits) (1-5 digits)
3-452
NWA-033623-001 Rev.8.1
91ch3005.fm
APRIL/16/2010