Station-To-Station Calling-Ccis - NEC UNIVERGE SV9300 Networking Manual

STATION-TO-STATION CALLING-CCIS

General Description
This feature permits any station user to dial another station directly, through CCIS, without Attendant
assistance.
Programming
In addition to the programming of flexible station numbering, perform the following programming:
START
CM05 Assign a Unit number and Slot number to the
LC/DLC blade.
CM10 Assign a station number to each Physical Port
number.
NOTE:
CM12 Assign the station type to each station.
END
DESCRIPTION
To the following stations, 5 or more
digits station number must not be
assigned.
• Stations observed by SMDR/
PMS/OAI
• Front Desk Terminal/Digital
Multiline Terminal TIMS (CIS)
STATION-TO-STATION CALLING-CCIS
• Y=0
(1) XX ZZ
XX: 01-50: Unit No.
ZZ : 01-18: Slot No.
(2) 10: DLC blade
20: LC blade
• Y=00
(1) XX YY ZZ: Physical Port No.
XX: 01-50: Unit No.
YY: 01-18: Slot No.
ZZ : 01-32: Circuit No.
(2) X-XXXXXXXX: Station No.
• Y=00 Telephone types
(1) X-XXXXXXXX: Station No.
(2) 1 : DP
2 : DTMF
3 : DP/DTMF
• Y=03 Kind of Telephone
(1) X-XXXXXXXX: Station No.
(2) 15 : Ordinary station
1-225
Chapter 1 CCIS FEATURES
DATA
NWA-088654-001 Rev.1.0
94ch1006.fm