NEC UNIVERGE SV8300 Command Manual page 109

COMMAND CODE TITLE:
08
352 When a call is transferred by Remote Access to System (DISA)
to predetermined station and time-out occurs, the call is contin-
ued or dropped
353 Buzzer sound when terminating incoming call to attendant that
is in Attendant Console Lockout
357 Diversion display on Multiline Terminal/DESKCON when
originating/terminating a call
359 When a call is transferred by Automated Attendant to predeter-
mined station and time out occurs, the call is continued or
dropped
361 Dial "**" is automatically added to the digits sent to Radio
Paging System
362 Confirmation tone after dialing access code for Account Code/
Authorization Code/Forced Account Code
363 For Automated Attendant call, caller dials while receiving
message or music
365 Send Dial Tone when holding trunk by Hold key
367 Camp-On (Call Waiting) Tone sent to busy station by Call Wait-
ing-Station/-Terminating (Camp-On Call Waiting method)
NOTE: In Italy, Belgium, Denmark, Switzerland and Spain, you
have to set setting data to 0.
368 Centralized Billing-CCIS for Center Office
369 Automatic return of originating station to the held C.O. line
call, after the inquiry call is disconnected.
370 Call Forwarding-Outside-CCIS on incoming call from CCIS
BASIC SERVICES
BASIC SERVICE
See CM30 Y=30 CM41 Y=0>39
See CM30 Y=30, 31, 32, 33 CM41 Y=0>39
See CM90 Y=00: F0058
0 Disconnect call
1 Continue call
0 Not provided
1 To provide
0 Available
1 Not available
0 Disconnect call
1 Continue call
0 Allowed
1 Restricted
0 No tone
1 Service Set Tone
0 Not allowed
(Allowed after receiving the message
or music)
1 Allowed
0 To send
1 Not sent
0 Every 4 seconds
1 Only once
0 To provide (for Center Office)
1 Not provided (for Local Office)
0 Automatic return to C.O. line call
1 Return to C.O. line call via hooking,
when receiving ROT
0 Restricted
1 Allowed
3-53
: Default
SETTING DATA
Continued on next page
NWA-033623-001 Rev.8.1
91ch3001.fm
JANUARY/31/2012
CM08