Speed Dialing Number And Name - NEC SL1000 Programming Manual

SL1000/SL1100
Level
SB
Description
Use Program 13-04 : Speed Dialing Number and Name to store Speed Dialing data in the Speed
Program
Dialing areas. This program is also used to define the names assigned to the Speed Dialing numbers.
Input Data
13
Item
No.
01 Speed Dialing Data
Assign dial number for 000-
999 bins
02 Name
03 Transfer Mode
04 Transfer Destination Num-
ber
05 Incoming Ring Pattern
06 CR/PR feature
07 VRS Message Number
08 Memo1
09 Memo2
2-92
Program 13 : Abbreviated Dialing

13-04 : Speed Dialing Number and Name

Speed Dialing Bin Number
Item
1 ~ 9, 0,
key 1), Recall/Flash (Press line
key 2),
@ = Code to wait for answer su-
pervision in ISDN (Press line key
3)
(Maximum 36 digits)
Maximum 12 Characters (Use dial
pad to enter name)
0 = Not Used
1 = Internal Dial
2 = Incoming Ring Group (IRG)
3 = Remote Monitor
If Transfer mode is (Refer to 13-
04-03) :
1 = Internal Dial Mode
1 ~ 9, 0,
(Maximum 36 Characters)
2 = Incoming Ring Group
0 ~ 25 (IRG Number)
P = Pause
R = Recall
@ = Additional Digits when using
ISDN functionality
3 = Remote Monitor
Dial (Up to 4 digits) (SL1000)
Dial (Up to 8 digits) (SL1100)
Incoming Ring Pattern
0 = Normal Pattern
1 ~ 4 = Tone Pattern (1 ~ 4)
5 ~ 9 = Scale Pattern (1 ~ 5)
0 = Disable
1 = Enable
0 ~ 100
Maximum 28 digit
Can only be
changed in WebPro
or PCPro.
Maximum 28 digit
Can only be
changed in WebPro
or PCPro.
Input Data Default
, #, Pause (Press line No setting
*
No setting
No setting
, #, P, R, @
*
No setting
No setting
ISSUE 1.0
000 ~ 999
Related
Program
0
13-04-03
0 13-04-03
0 14-05
0
15-02-58
15-02-58
Program 13 : Abbreviated Dialing
Note