NEC UNIVERGE SV8300 Command Manual page 205

Hide thumbs Also See for UNIVERGE SV8300:

Table of Contents

COMMAND CODE TITLE:

Slot number and Circuit number

The Slot number is the number assigned to the slot which accommodates the blade in a Line/Trunk

The Circuit number is the number assigned to the circuit which accommodates the blade in a Line/

Trunk chassis.

The following shows the outline of the Slot number and Circuit number.

Example: When assigning the station number "300" for the CD-8DLCA blade accommodated to Slot

No. 01 of the Unit No. 01 and for the Multiline Terminal accommodated to the Circuit No.

• Data settings for CM05: CM05 Y=0>0101: 10

• Data settings for CM10: CM10 Y=00>010101: F300

STATION NUMBER, TRUNK NUMBER, BLADE NUMBER

Outline of the Slot No. and Circuit No.

Circuit No. 01

Continued on next page

NWA-033623-001 Rev.8.1

JANUARY/14/2011