[Cm64] Automated Attendant, Tenant Number For Music On Hold, Number Of Queue Limit, Trunk Access Code For Mobility Access Mode, Isdn Alternating Routing - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
64
FUNCTION:
This command is used to define the answering system of the Automated Attendant feature and assign
the Tenant Number for Music on Hold, the Number of Queue Limit, the Trunk access code for Mobility
Access mode and the ISDN Alternating Routing.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
ST + 64Y/YY + DE
DATA TABLE:
Y
No. MEANING
0 Answering System for
Day Mode
NOTE: If no tone connection is required, Dial Tone sending can be stopped by CM48 Y=2.
AUTOMATED ATTENDANT, TENANT NUMBER FOR MUSIC ON HOLD, NUMBER
OF QUEUE LIMIT, TRUNK ACCESS CODE FOR MOBILITY ACCESS MODE, ISDN
ALTERNATING ROUTING
TENANT NUMBER
+
(2 digits)
TENANT
00-63
DATA
+ DE +
(1-26 digits)
SETTING DATA
DATA MEANING
00 DT connection
01 Hold Tone on CPU blade +
DT connection
02 1st Answering Message +
DT connection
03 DT connection
3-444
+ EXE
: Default
RELATED
COMMAND
CM30 Y=02, 03
CM48 Y=2>06
CM41 Y=0>33, 43
CM49
CM63 Y=2
Continued on next page
NWA-033623-001 Rev.8.1
CM64
91ch3005.fm
JULY/17/2009