[Cm29] Numbering Plan Tenant Group - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
29
FUNCTION:
When each tenant has its own numbering plan in a multiple-tenant system, all the tenants are divided
into four groups. Numbering Plan Group data is then assigned on a tenant basis.
PRECAUTION:
If the data is not assigned ("NONE"), then Numbering Plan Group 0 is used for all tenants.
ASSIGNMENT PROCEDURE:
+ + DE +
ST 29
DATA TABLE:
TENANT NUMBER
00 Tenant 00
63 Tenant 63
NUMBERING PLAN TENANT GROUP
TENANT
+ +
NUMBER
DE
(3 digits)
(2 digits)
SETTING DATA
710 Numbering Plan Group 0
711 Numbering Plan Group 1
712 Numbering Plan Group 2
713 Numbering Plan Group 3
NONE Numbering Plan Group 0
DATA
+
EXE
3-250
RELATED
REMARKS
COMMAND
CM20 Y=0
CM20 Y=1
CM20 Y=2
CM20 Y=3
NWA-033623-001 Rev.8.1
CM29
: Default
91ch3003.fm