[Cm48] Hold/Wake Up/Timed Reminder/Automated Attendant; Tone - NEC UNIVERGE SV8300 Command Manual

COMMAND CODE TITLE:
48
FUNCTION:
This command determines the kind of tone/tone source on various services; it also determines whether
the Announcement Service is provided when a PS does not answer in a Wireless Communication Sys-
tem.
PRECAUTION:
None
ASSIGNMENT PROCEDURE:
ST + 48Y + DE
DATA TABLE:
Y
No. MEANING
0 Hold Tone
Sending
NOTE 1: External hold tone through the PGD (2) -U10 can not be sent to IP trunk (P2P CCIS) and
SIP Trunk.
NOTE 2: When IP station is used, this data is not effective. In this case, the hold tone source on IP
Station is sent.
HOLD/WAKE UP/TIMED REMINDER/AUTOMATED ATTENDANT

TONE

1ST DATA
+ + DE +
(2/4 digits)
1ST DATA
DATA MEANING
00 C.O. Line
01 Tie Line
02 Station
2ND DATA
+ EXE
(1-8 digits)
2ND DATA
DATA
0000 No Tone
0500 Hold Message
1300 External Hold Tone
Source on CPU blade/
External Hold Tone
Source
1400 Hold Tone Source on
CPU blade
1500 Internal Tone Generator
NONE Internal Tone Generator
3-392
RELATED
COMMAND
MEANING
CM49 Y=00
CM64 Y=1
NOTE 2
CM48 Y=3
NOTE 2
NOTE 2
NOTE 2
Continued on next page
NWA-033623-001 Rev.8.1
CM48
: Default
91ch3004.fm
APRIL/16/2010