Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 171

Precautions
Other than the following, the operation is the same as that of the PLSV/DPLSV instruction.
• When this table is used for stepping operation, the next table can be activated after stop using the pulse decelerate and
stop command. (Page 59)
• This table cannot be specified for continuous operation.
• If the command speed is changed to 0 during positioning operation, pulses are decelerated to a stop but the table operation
does not end. Thus, dwell time is not measured and tables are not switched. When the drive contact of the table operation
instruction is on, changing the command speed restarts pulse output.
Related devices
Other than the following, the related devices are the same as those of the PLSV/DPLSV instruction.
■Special relays
• CPU module
Axis 1 Axis 2 Axis 3
SM5916 SM5917 SM5918
R/W: Read/write, : Not supported
• High-speed pulse input/output module
First module Second module
Axis 5 Axis 6 Axis 7 Axis 8
SM5920 SM5921 SM5922 SM5923
R/W: Read/write, : Not supported
■Special registers
• CPU module
Axis 1 Axis 2 Axis 3
SD5506 SD5546 SD5586
SD5511 SD5551 SD5591
R: Read only, R/W: Read/write, : Not supported
• High-speed pulse input/output module
First module Second module
Axis 5 Axis 6 Axis 7 Axis 8
SD5666 SD5706 SD5746 SD5786
SD5671 SD5711 SD5751 SD5791
R: Read only, R/W: Read/write, : Not supported
Axis 4 Name
SM5919 Positioning table data initialization disable
Third module Fourth module
Axis 9 Axis 10 Axis 11 Axis 12
SM5924 SM5925 SM5926
Axis 4 Name
SD5626 Positioning execution table number
SD5631 Positioning error (error occurrence table No.)
Third module Fourth module
Axis 9 Axis 10 Axis 11 Axis 12
SD5826 SD5866 SD5906
SD5831 SD5871 SD5911
High Speed I/O
Parameter

Name
SM5927 Positioning table data
initialization disable
High Speed I/O
Parameter


Name
SD5946 Positioning execution table
number
SD5951 Positioning error (error
occurrence table No.)
6.2 Operations of Control Method
R/W Reference
R/W Page 74
High R/W Reference
Speed I/O
Parameter
 R/W Page 74
R/W Reference
R Page 73
R/W Page 74
High R/W Reference
Speed I/O
Parameter
 R Page 73

R/W Page 74
6 TABLE OPERATION
169
6