Appendix 3 Added And Enhanced Functions - Mitsubishi Electric MELSEC iQ-F FX5 User Manual

Appendix 3
This section describes added and enhanced functions of the CPU module and the engineering tool, as well as the
corresponding firmware versions of the CPU module and software versions of the engineering tool.
• Firmware version can be checked through the module diagnostics (CPU diagnostics). For the module diagnostics (CPU
diagnostics), refer to the User's Manual (Hardware) of the CPU module to be used.
• For software version, refer to GX Works3 Operating Manual.
Added and enhanced function
Positioning of high-speed pulse input/
output module is added (Support
high-speed pulse input/output
module)
Interrupt input signal 1 high-speed
mode is added
All module reset when a stop error
occurs is added
Positioning table data retaining
function is added
Added and Enhanced Functions
Firmware version of the CPU
module
"1.030" or later
"1.030" or later
"1.030" or later
"1.030" or later
Software version of the
engineering tool
"1.025B" or later
"1.025B" or later
"1.025B" or later
"1.025B" or later

Appendix 3 Added and Enhanced Functions

Reference

Page 58
Page 40
Page 160
APPX
251
A