Mitsubishi Electric MELSEC iQ-F FX5 User Manual page 169

Precautions
Other than the following, the same as cautions for the DVIT/DDVIT instruction apply.
• Combinations other than the following cannot be used during continuous operation.
The first table
Control method 3: Interrupt 1 Speed Positioning
5: Table Transition Variable Speed Operation
Control method [3: Interrupt 1 Speed Positioning] must be specified to the first or second table. If control method [3: Interrupt
1 Speed Positioning] is specified to the second table, only control method [5: Table Transition Variable Speed Operation] can
be specified to the first table.
• Continuous operation can not be used for the high-speed pulse input/output module. If this table is specified for continuous
operation for the high-speed pulse input/output module, an error occurs.
Related devices
Other than the following, the related devices are the same as those of the DVIT/DDVIT instruction.
■Special relays
• CPU module
Axis 1 Axis 2 Axis 3
SM5916 SM5917 SM5918
R/W: Read/write, : Not supported
• High-speed pulse input/output module
First module Second module
Axis 5 Axis 6 Axis 7 Axis 8
SM5920 SM5921 SM5922 SM5923
R/W: Read/write, : Not supported
■Special registers
• CPU module
Axis 1 Axis 2 Axis 3
SD5506 SD5546 SD5586
SD5511 SD5551 SD5591
R: Read only, R/W: Read/write, : Not supported
• High-speed pulse input/output module
First module Second module
Axis 5 Axis 6 Axis 7 Axis 8
SD5666 SD5706 SD5746 SD5786
SD5671 SD5711 SD5751 SD5791
R: Read only, R/W: Read/write, : Not supported
Axis 4 Name
SM5919 Positioning table data initialization disable
Third module Fourth module
Axis 9 Axis 10 Axis 11 Axis 12
SM5924 SM5925 SM5926
Axis 4 Name
SD5626 Positioning execution table number
SD5631 Positioning error (error occurrence table No.)
Third module Fourth module
Axis 9 Axis 10 Axis 11 Axis 12
SD5826 SD5866 SD5906
SD5831 SD5871 SD5911
The second table

3: Interrupt 1 Speed Positioning
High Speed I/O
Parameter

Name
SM5927 Positioning table data
initialization disable
High Speed I/O
Parameter


Name
SD5946 Positioning execution table
number
SD5951 Positioning error (error
occurrence table No.)
6.2 Operations of Control Method
R/W Reference
R/W Page 74
High R/W Reference
Speed I/O
Parameter
 R/W Page 74
R/W Reference
R Page 73
R/W Page 74
High R/W Reference
Speed I/O
Parameter
 R Page 73

R/W Page 74
6 TABLE OPERATION
167
6