Step 4 Click the OK button to save the settings and exit the interface.
Step 5 In the HDD Information menu, the HDD property will be displayed in the list.
Note:
At least 2 hard disks must be added on your DVR when you want to set a HDD to
Redundancy, and there is one HDD with R/W property.
14.4 Configuring the Quota Mode
Each camera can be configured with allocated quota for the storage of recorded files.
Steps
Step 1 Go to Menu > HDD > Advanced > Storage Mode.
Step 2 Set the Mode to Quota, as shown below.
Note:
The DVR must be rebooted to enable the changes to take effect.
Step 3 Select a camera for which you want to configure quota.
Step 4 Enter the storage capacity in the text field of Max. Record Capacity (GB).
Step 5 You can copy the quota settings of the current camera to other cameras if required.
Click the Copy button to enter the Copy Camera interface, as shown below.
Storage Mode Settings Interface
179