Calling Patrols - Grundig GD-RT-AC3016N User Manual

Step 3 Click the Set button to add key points for the patrol.
Step 4 Configure key point parameters, such as the key point No., duration of staying for
one key point and speed of patrol. The key point is corresponding to the preset. The
Key Point No. determines the order at which the PTZ will follow while cycling
through the patrol. The Duration refers to the time span to stay at the corresponding
key point. The Speed defines the speed at which the PTZ will move from one key
point to the next.
Step 5 Click the Add button to add the next key point to the patrol, or you can click the OK
button to save the key point to the patrol.
You can delete all the key points by clicking the Clear button for the selected patrol,
or click the Clear All button to delete all the key pints for all patrols.

4.2.4 Calling Patrols

Calling a patrol makes the PTZ to move according the predefined patrol path.
Step 1 Click the button PTZ in the lower-right corner of the PTZ Settings interface;
Or press the PTZ button on the front panel or click the PTZ Control icon
quick setting bar, or select the PTZ option in the right-click menu to show the PTZ
control panel.
Step 2 Click the General tab to show the general settings of the PTZ control.
Key point Configuration
63
in the