Recording And Capture Settings; Configuring The Encoding Parameters - Grundig GD-RT-AC3016N User Manual

5. Recording and Capture Settings

Note:
The picture capture is supported by the GD-RT-AT5016N only.

5.1 Configuring the Encoding Parameters

Before you start
Step 1 Make sure that the HDD has already been installed. If not, please install a HDD and
initialize it. (Menu>HDD>General)
Step 2 Click Advanced tab to check the storage mode of the HDD.
(Menu>HDD>Advanced>Storage Mode)
1) If the HDD mode is Quota, please set the maximum record capacity. For detailed
information, see Chapter 14.4 Configuring Quota Mode.
2) If the HDD mode is Group, you should set the HDD group. For detailed information,
see Chapter 5.9 Configuring HDD Group.
HDD- General
HDD- Advanced
70