Step 1 Log in the IP camera by the web browser, and enable the intrusion detection by
checking the checkbox of it. You may enter the motion detection configuration
interface by Configuration > Advanced Configuration > Events > Intrusion Detection.
Step 2 Configure the required parameters of intrusion detection, including area, arming
schedule and linkage methods. Refer to the user manual of smart IP camera for
detailed instructions.
Steps
Step 1 Go to Menu > Playback.
Step 2 Select the Smart in the drop-down list on the top-left side.
Step 3 Select a camera in the camera list.
Step 4 Select a date in the calendar and click the
Refer to the table below for the descriptions of the buttons on the Smart Playback
Toolbar.
Detailed Explanation of Smart Playback Toolbar:
Button
Operation
Draw line for the
line crossing
Setting Intrusion Detection on IP Camera
Smart Playback Interface
Button
Operation
Draw
quadrilateral for
button to play.
100
Button
Operation
Draw rectangle
for the intrusion