Grundig GD-RT-AC3016N User Manual page 72

Hide thumbs Also See for GD-RT-AC3016N:
Table of Contents

Advertisement

camera. E.g., if the resolution of the front-end camera is 720p, then the encoding
resolution of the main stream will adjust to 720p automatically.
 The resolution of 960 × 1080 (1080P Lite) is available when the 1080P Lite is
enabled in the Record>Advanced Settings interface (refer to Chapter 5.12
Configuring 1080P Lite).
 Please refer to the Appendix-Specifications for the supported resolutions of different
models.
Bitrate Type: Set the bitrate type to be Variable or Constant.
Video Quality: Set the video quality of recording, with 6 levels configurable.
Note:
The Stream Type, Resolution, Bitrate Type and Video Quality are not configurable for the
Main Stream (Event) of the IP Camera.
Frame Rate: Set the frame rate of recording.
Note:
 For GD-RT-AC3004N and GD-RT-AC3016N, when 3 MP signal input is connected,
the frame rate of the main stream cannot exceed 15 fps.
 For GD-RT-AP5004P, GD-RT-AP5008P, GD-RT-AP5016N, GD-RT-AT5016N, when
5 MP signal input is connected, the frame rate of the main stream cannot exceed 12
fps. When 4 MP signal input is connected, the frame rate of the main stream cannot
exceed 15 fps.
 The minimum frame rate for main stream is 1 fps.
Max. Bitrate Mode: Set the mode to General or Custom.
Max Bitrate (Kbps): Select or customize the maximum bit rate for recording.
Max. Bitrate Range Recommended: A recommended max. bit rate range is
provided for reference.
Max. Average Bitrate (Kbps): Set the max. average bit rate which refers to the
average amount of data transferred per unit of time.
Video Encoding:
You can configure H.264 or H.265 for the main stream (continuous) of IP and analog
cameras.
Note:
When the connected IP camera does not support H.265, only H.264 can be seleted for the
main stream (continuous).
Step 3 Check the checkbox of Enable H.264+ or Enable H.265+ to enable this function.
Enabling it helps to ensure the high video quality with a lowered bitrate.
Note:
 The analog and IP cameras support enabling H.264+/H.265+ if the video encoding is
H.264/H.265 for the main stream.
 
 
72 

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gd-rt-ap5004pGd-rt-ac3004nGd-rt-5008pGd-rt-5016n

Table of Contents