Check the checkbox of Enable HDD Sleeping (by default), and the HDDs which are free of
working for a long time will be set to sleep.
Uncheck the checkbox of Enable HDD Sleeping, and the HDDs will be set to work for all
time.
14.2 Managing a Network HDD
You can add the allocated NAS or disk of IP SAN to DVR, and use it as network HDD.
Step 1 Go to Menu > HDD > General.
Step 2 Click the Add button to enter the Add NetHDD interface, as shown in Fehler!
Verweisquelle konnte nicht gefunden werden..
Step 3 Add the allocated NetHDD.
Step 4 Select the type to NAS or IP SAN.
Enable HDD Sleeping
HDD Information Interface
174