17.3 Configuring the DST Settings
Step 1 Go to Menu > Configuration > General > DST Settings.
Step 2 Check the checkbox before the Auto DST Adjustment item.
Or you can manually check the Enable DST checkbox, and then you choose the
date of the DST period.
17.4 Configuring More Settings
Step 1 Go to Menu > Configuration > General > More Settings.
Step 2 Configure the following settings:
Device Name: Edit the name of DVR.
Device No.: Edit the serial number of DVR. The Device No. can be set in the range
of 1 to 255, and the default No. is 255.
Auto Logout: Set timeout time for menu inactivity. E.g., when the timeout time is set
to 5 Minutes, then the system will exit from the current operation menu to live view
screen after 5 minutes of menu inactivity.
CVBS Output Brightness: Adjust the video output brightness via the CVBS
interface.
Menu Output Mode: You can choose the menu display on different video output.
For GD-RT-AT5016N, Auto, HDMI1/VGA, and HDMI2 are selectable.
For other models, Auto and HDMI/VGA are selectable.
DST Settings Interface
More Settings Interface
202