Configuring The Recording And Capture Schedule - Grundig GD-RT-AC3016N User Manual

 The minimum frame rate for the sub-stream is 1 fps.
 You can select the Video Encoding for the sub-stream of IP and analog cameras.
For the analog cameras, H.264 and H.265 are selectable. For the IP cameras
supporting H.265, you can select H.265 encoding mode.
Step 8 Set parameters for capture.
1) Select the Capture tab.
2) Select a camera from the drop-down list.
3) Configure the parameters.
4) Click Apply to save the settings.
5) (Optional) If the parameters can also be used to other cameras, click Copy to copy
the settings to other channels.
Note:
The interval is the time period between two capturing actions. You can configure all the
parameters on this menu on your demand.

5.2 Configuring the Recording and Capture Schedule

Note:
 The DVR supports continuous, alarm, motion, motion | alarm, motion & alarm, event,
and POS (for GD-RT-AT5016N) triggered recording types.
 In this chapter, we take the record schedule procedure as an example, and the same
procedure can be applied to configure schedule for recording.
Set the record schedule, and then the camera will automatically start/stop recording
according to the configured schedule.
Step 1 Go to Menu > Record/Capture > Schedule.
Capture Settings
75