Grundig GD-RT-AC3016N User Manual page 162

Step 3 Configure the following Email settings:
Enable Server Authentication (optional): Check the checkbox to enable the
server authentication feature.
User Name: The user account of sender's Email for SMTP server authentication.
Password: The password of sender's Email for SMTP server authentication.
SMTP Server: The SMTP Server IP address or host name (e.g.,
smtp.263xmail.com).
SMTP Port: The SMTP port. The default TCP/IP port used for SMTP is 25.
Enable SSL (optional): Click the checkbox to enable SSL if required by the SMTP
server.
Sender: The name of sender.
Sender's Address: The Email address of sender.
Select Receivers: Select the receiver. Up to 3 receivers can be configured.
Receiver: The name of the receiver of the Email.
Receiver's Address: The Email address of the receiver.
Enable Attached Picture: Check the checkbox if you want to send email with
attached alarm images. The interval is the time between two captures of the alarm
images.
Note:
 For the IP cameras, the alarm images are directly sent as the attached pictures by
Email. Up to one picture can be sent for one IP camera. The attached pictures of the
linked cameras cannot be sent.
 For analog cameras, 3 attached pictures can be sent for one analog camera when
the alarm is triggered.
Interval: The interval refers to the time between two actions of sending attached
pictures.
E-mail Test: Sends a test message to verify that the SMTP server can be reached.
Step 4 Click the Apply button to save the Email settings.
Step 5 You can click the Test button to test whether your Email settings work. The
corresponding Attention message box pops up.
Email Testing Attention
162