Grundig GD-RT-AC3016N User Manual page 140

1) Threshold: Range [1s-10s], the threshold for the time of the object loitering in the
region. When the duration of the object in the defined detection area is longer than
the set time, the alarm will be triggered.
2) Drag the slider to set the detection sensitivity.
Sensitivity: Range [1-100]. The value of the sensitivity defines the size of the object
which can trigger the alarm. The higher the value is, the more easily the detection
alarm can be triggered.
3) Percentage: Range [1-100]. Percentage defines the ratio of the in-region part of the
object which can trigger the alarm. For example, if the percentage is set as 50%,
when the object enters the region and occupies half of the whole region, the alarm is
triggered.
4) Click OK to save the rule settings and back to the line crossing detection settings
interface.
Step 7 Click and draw a quadrilateral in the preview window by specifying four vertexes
of the detection region, and right click to complete drawing. Only one region can be
configured.
You can use the
Note:
Up to 4 rules can be configured.
Set Intrusion Crossing Detection Rules
to clear the existing virtual line and re-draw it.
140