Step 2 The online cameras with same network segment will be detected and displayed in
the camera list.
Step 3 Select the IP camera from the list and click
admin password of the DVR's). Or you can click the One-touch Adding button to add
all cameras (with the same admin password) from the list.
Note:
Make sure the camera to add has already been actiavted by setting the admin password,
and the admin password of the camera is the same with the DVR's.
Step 4 (Optional) Check the checkbox of Enable H.265 (For Initial Access) for the
connected IP camera supporting H.265. Then the IP camera will be encoded with
H.265.
Step 5 (For the encoders with multiple channels only) check the checkbox of Channel Port
in the pop-up window, as shown in the following figure, and click OK to add multiple
channels.
IP Camera Management Interface
Select Multiple Channels
43
to add the camera (with the same