Live View; Introduction Of Live View; Operations In Live View Mode - Grundig GD-RT-AC3016N User Manual

3. Live View

3.1 Introduction of Live View

Live view shows you the video image getting from each camera in real time. The DVR will
automatically enter Live View mode when powered on. It is also at the very top of the menu
hierarchy, thus hitting the ESC many times (depending on which menu you're on) will bring
you to the Live View mode.
Live View Icons
In the live view mode, there are icons at the right top of the screen for each channel,
showing the status of the record and alarm in the channel, so that you can know whether
the channel is recorded, or whether there are alarms occur as soon as possible.
Icons

3.2 Operations in Live View Mode

In live view mode, there are many functions provided. The functions are listed below.
Single Screen: show only one screen on the monitor.

Multi-screen: show multiple screens on the monitor simultaneously.

Start Auto-switch: the screen is auto switched to the next one. And you must set the

dwell time for each screen on the configuration menu before enabling the auto-switch.
Menu>Configuration>Live View>Dwell Time.
Start Recording: normal record and motion detection record are supported.

Output Mode: select the output mode to Standard, Bright, Gentle or Vivid.

Table 3-1 Description of Live View Icons
Description
Alarm (video loss, tampering, motion detection, VCA or
sensor alarm)
Record (manual record, schedule record, motion detection or
alarm triggered record)
Alarm & Record
Event/Exception (motion detection, sensor alarm or
exception information. For details, see Chapter 8.6
Handling Exceptions.)
49