2) Check the checkbox of Enable.
3) Select Mode from the drop-down list.
There are three different modes for the date format to configure holiday schedule. By
Month, By Week, and By Date are selectable.
4) Set the start and end date.
5) Click Apply to save settings.
6) Click OK to exit the Edit interface.
Step 3 Configure the record schedule.
Please refer to the Chapter 5.2 Configuring Recording and Capture Schedule,
while you may choose Holiday in the Schedule drop-down list, or you can draw the
schedule on the timeline of Holiday.
Note:
Up to 8 periods can be configured for each day. And the time periods cannot be
overlapped each other.
In the time table of the channel, both holiday schedule and normal day schedule are
displayed.
Repeat the above step 4 to set Holiday schedule for other channels. If the holiday
schedule can also be used to other channels, click Copy and choose the channel
you want to apply the settings.
5.8 Configuring the Redundant Recording and Capture
Edit Holiday Settings
85