Configuring The Ntp Server - Grundig GD-RT-AC3016N User Manual

2) In the Device Domain Name text field, enter the domain obtained from the
NO-IP website (www.no-ip.com).
3) Enter the User Name and Password registered in the NO-IP website.
Step 4 Click the Apply button to save and exit the interface.

12.2.3 Configuring the NTP Server

A Network Time Protocol (NTP) Server can be configured on your DVR to ensure the
accuracy of system date/time.
Step 1 Go to Menu > Configuration > Network > NTP.
Step 2 Check the Enable NTP checkbox to enable this feature.
Step 3 Configure the following NTP settings:
Interval: Time interval between the two synchronizing actions with NTP server. The

unit is minute.
NTP Server: IP address of NTP server.

NTP Port: Port of NTP server.

Step 4 Click the Apply button to save and exit the interface.
Note:
The time synchronization interval can be set from 1 to 10080 minutes, and the default value
is 60 minutes. If the DVR is connected to a public network, you should use a NTP server
that has a time synchronization function, such as the server at the National Time Center (IP
Address: 210.72.145.44). If the DVR is set in a more customized network, NTP software
can be used to establish a NTP server used for time synchronization.
NO-IP Settings Interface
NTP Settings Interface
155