Step 3 Select the VCA detection type to Face Detection.
Step 4 Click
to enter the face detection settings interface. Configure the trigger
channel, arming schedule, linkage action and PTZ linking for the face detection alarm.
Please refer to step 3 to step 5 of Chapter 8.2 Setting Sensor Alarms for detailed
instructions.
Step 5 Click the Rule Settings button to set the face detection rules. You can drag the
slider to set the detection sensitivity.
Sensitivity: Range [1-5]. The higher the value is, the more easily the face can be
detected.
Step 6 Click Apply to activate the settings.
Face Detection
PTZ Linking
136