Configuring The Https Port - Grundig GD-RT-AC3016N User Manual

Note:
The Server Port should be set to the range of 2000-65535 and it is used for remote client
software access. The HTTP port is used for remote IE access.
 Output Bandwidth Limit: You can check the checkbox to enable output bandwidth
limit.
 Output Bandwidth: After enable the output bandwidth limit, input the output
bandwidth in the text field.
Note:
 The output bandwidth limit is used for the remote live view and playback.
 The default output bandwidth is the maximum limit.
Step 3 Click the Apply button to save and exit the interface.

12.2.6 Configuring the HTTPS Port

HTTPS provides authentication of the web site and associated web server that one is
communicating with, which protects against Man-in-the-middle attacks. Perform the
following steps to set the port number of https.
Example
If you set the port number as 443 and the IP address is 192.0.0.64, you may access the
device by inputting https://192.0.0.64:443 via the web browser.
Note:
The HTTPS port can be only configured through the web browser.
Step 1 Open web browser, input the IP address of device, and the web server will select the
language automatically according to the system language and maximize the web
browser.
Step 2 Input the correct user name and password, and click Login button to log in the
device.
Step 3 Go to Configuration > Remote Configuration > Network Settings > HTTPS.
Step 4 Create the self-signed certificate or authorized certificate.
159