Connecting Poc Cameras - Grundig GD-RT-AC3016N User Manual

Step 5 Click OK to save the settings and exit the interface.

2.8 Connecting PoC Cameras

-K/P series DVR support PoC (Power over Coaxitron) cameras connection. DVR will detect
the connected PoC cameras automatically, manage the power consumption via the coaxial
communication, and provide power to the cameras via coaxitron.
Before you start
Connect the PoC camera to the DVR.
Step 1 Go to Menu > Camera > PoC Information.
Step 2 Check the status of connected PoC camera.
 : When the PoC camera is connected to the DVR, the default status is AF.
 : If the connected PoC camera supports AT mode and the power of the DVR
PoC module is enough, the DVR will switch the default AF mode to AT mode.
 : If the DVR detects the power consumption of the PoC camera is higher than
the allowed maximum power of DVR PoC module, it will stop power supply to the
camera, and the camera status becomes grey.
Step 1 Check the connected AF or AT camera number and the connectable camera
number.
Note:
Password Configuration of the Camera
47