Step 2 Select a NIC to test network delay and packet loss.
Step 3 Enter the destination address in the text field of Destination Address.
Step 4 Click the Test button to start testing network delay and packet loss.
12.3.2 Exporting a Network Packet
By connecting the DVR to network, the captured network data packet can be exported to
USB-flash disk, SATA and other local backup devices.
Step 1 Go to Menu > Maintenance > Net Detect > Network Detection.
Step 2 Select the backup device from the drop-down list of Device Name.
Note:
Click the Refresh button if the connected local backup device cannot be displayed. When it
fails to detect the backup device, please check whether it is compatible with the DVR. You
can format the backup device if the format is incorrect.
Step 3 Click the Export button to start exporting.
Step 4 After the exporting is complete, click OK to finish the packet export.
Note:
Up to 1M data can be exported each time.
12.3.3 Checking the Network Status
Export Network Packet
Packet Export Attention
164