Enhanced VCA Mode: For GD-RT-AP5004P, GD-RT-AP5008P, GD-RT-AP5016N,
GD-RT-AT5016N, the enhanced VCA mode conflicts with the 2K/4K output and 4
MP/5 MP signal input. You can enable or disable VCA mode.
Enable Enhanced VCA Mode
1) Check the checkbox to enable enhanced VCA mode.
2) Click Apply and the attention box pops up.
3) Click Yes to apply the function and reboot the device.
Disable Enhanced VCA Mode
1) Uncheck the checkbox to disable enhanced VCA mode.
2) Click Apply and the attention box pops up.
3) Click Yes to apply the function and reboot the device.
Note:
If you have configured 2K/4K output, or connected 4 MP/5 MP signal input already, when
you enable enhanced VCA mode and after the device reboots, the output resolution will
decrease to 1080p, and the 4 MP/5 MP signal input will display no video.
Step 3 Click Apply to save the settings.
17.5 Managing User Accounts
There is a default account in the DVR: Administrator. The Administrator user name is admin
and the password is set when you start the device for the first time. The Administrator has
the permission to add and delete user and configure user parameters.
17.5.1 Adding a User
Step 1 Go to Menu > Configuration > User.
203