Using The Mouse In Live View - Grundig GD-RT-AC3016N User Manual

Playback: play back the recorded videos for current day.

Aux/Main Monitor: the DVR checks the connection of the output interfaces to define

the main and auxiliary output interfaces. When the aux output is enabled, the main
output cannot do any operation, and you can do some basic operation on the live view
mode for the Aux output.
For GD-RT-AT5016N , there are two HDMI interfaces. HDMI1 and VGA interfaces share
simultaneous output. The priority level for the main and aux output is HDMI2> VGA/HDMI1.
The CVBS output only serves as the aux output or live view output. The priority relationship
is shown as Table 3-2.
S.N HDMI2 VGA/HDMI1 CVBS Main output
1 √ √
2 √ or × ×
3 × √
For other DVR with CVBS output, the VGA/HDMI output is the main output, and the CVBS
output is the aux output. The priority relationship is shown as Table 3-3.
S.N HDMI VGA
1
Note:
√ means the interface is in use, × means the interface is out of use or the connection is
invalid. And the HDMI, VGA and CVBS can be used at the same time.

3.2.1 Using the Mouse in Live View

You can refer to Table 3-4 for the description of mouse operation in live view mode.
Name
Menu
Single
Screen
Table 3-2 Priorities of Outputs for GD-RT-AT5016N
√ or × HDMI2
√ or × HDMI2
√ or × VGA/HDMI1 CVBS
Table 3-3 Priorities of Outputs
CVBS Main output Auxiliary output
√ or × √ or × √ or × VGA/HDMI
Table 3-4 Mouse Operation in Live View
Description
Enter the main menu of the system by right clicking the
mouse.
Switch to the single full screen by choosing channel
number from the drop-down list.
Auxiliary
output
VGA/HDMI1
CVBS
CVBS
50
For Live View Output
Only
CVBS
VGA/HDMI1
HDMI2