Calling Linear Scan - Grundig GD-RT-AC3016N User Manual

Step 2 Use the directional button to wheel the camera to the location where you want to set
the limit, and click the Left Limit or Right Limit button to link the location to the
corresponding limit.
Note:
The speed dome starts linear scan from the left limit to the right limit, and you must set the
left limit on the left side of the right limit, as well the angle from the left limit to the right limit
should be no more than 180º.

4.2.8 Calling Linear Scan

Follow the procedure to call the linear scan in the predefined scan range.
Step 1 Click the button PTZ in the lower-right corner of the PTZ Settings interface;
Or press the PTZ button on the front panel or click the PTZ Control icon
quick setting bar to enter the PTZ setting menu in live view mode.
Step 2 Click the One-touch tab to show the one-touch function of the PTZ control.
PTZ Settings
66
in the