Grundig GD-RT-AC3016N User Manual page 158

Step 2 Configure the remote alarm host, server port, HTTP port, multicast, and RTSP port.
 Alarm Host IP/Port: With a remote alarm host configured, the device will send the
alarm event or exception message to the host when an alarm is triggered. The
remote alarm host must have the SCMS (Client Management System) software
installed.
The Alarm Host IP refers to the IP address of the remote PC on which the SCMS
(Client Management System) software is installed, and the Alarm Host Port must
be the same as the alarm monitoring port configured in the software (default port is
7200).
 Multicast IP: The multicast can be configured to realize live view for more than the
maximum number of cameras through network. A multicast address spans the
Class-D IP range of 224.0.0.0 to 239.255.255.255. It is recommended to use the IP
address ranging from 239.252.0.0 to 239.255.255.255.
When adding a device to the SCMS (Client Management System) software, the
multicast address must be the same as the device's multicast IP.
 RTSP Port: The RTSP (Real Time Streaming Protocol) is a network control
protocol designed for use in entertainment and communications systems to control
streaming media servers.
Enter the RTSP port in the text field of RTSP Port. The default RTSP port is 554,
and you can change it according to different requirements.
 Server Port and HTTP Port: Enter the Server Port and HTTP Port in the text
fields. The default Server Port is 8000 and the HTTP Port is 80, and you can
change them according to different requirements.
More Settings Interface
158