Table of Contents
Advertisement
Installed Certificate Property
Step 6 Check the checkbox to enable the HTTPS function.
Step 7 Click the Save button to save the settings.
12.2.7 Configuring Email
The system can be configured to send an Email notification to all designated users if an
event is detected, e.g. an alarm or motion event is detected, etc.
Before configuring the Email settings, the DVR must be connected to a local area network
(LAN) that maintains an SMTP mail server. The network must also be connected to either
an intranet or the Internet depending on the location of the e-mail accounts to which you
want to send notification. Additional, the Preferred DNS server must be configured.
Before you start
Make sure you have configured the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and
the Preferred DNS Server in the Network Settings menu. Please refer to Chapter 12.1
Configuring General Settings for detailed information.
Step 1 Go to Menu > Configuration > Network > Email.
Step 2 Select the Email tab to enter the Email Settings interface.
Email Settings Interface
161
Advertisement
Table of Contents
