Step 7 Select the Group number for the current HDD.
Note:
The default group No. for each HDD is 1.
Step 8 Click the OK button to confirm the settings.
Confirm HDD Group Settings
Step 9 In the pop-up Attention box, click the Yes button to finish the settings.
14.3.2 Setting a HDD Property
The HDD property can be set to redundancy, read-only or read/write (R/W). Before setting
the HDD property, please set the storage mode to Group (refer to step1-4 of Chapter 14.3.1
Setting HDD Groups).
A HDD can be set to read-only to prevent important recorded files from being overwritten
when the HDD becomes full in overwrite recording mode.
When the HDD property is set to redundancy, the video can be recorded both onto the
redundancy HDD and the R/W HDD simultaneously so as to ensure high security and
reliability of video data.
Step 1 Go to Menu > HDD > General.
Step 2 Select HDD from the list and click the
icon to enter the Local HDD Settings
interface, as shown below.
Set HDD Property
Step 3 Set the HDD property to R/W, Read-only or Redundancy.
178