Configuring The Camera Parameters Settings - Grundig GD-RT-AC3016N User Manual

Step 6 You can click Copy to copy the image settings of the current camera to other
cameras.
Step 7 Click Apply to save the settings.

15.3.2 Configuring the Camera Parameters Settings

Step 1 Go to Menu > Camera > Image > Camera Parameters Settings.
Step 2 Select the Camera from the drop-down list.
Step 3 Configure the parameters.
 Switch the 4 MP or 5 MP signal from the Signal Switch drop-down list. 4 MP
25/30 fps and 5 MP 20 fps are selectable. The 4 MP 25 fps and 4 MP 30 fps
signals are self-adaptive for the camera.
 Check Enable Defog to enable the defog function of the selected camera. And
set the Defog Level from 1 to 4.
 Adjust the parameters including Day to Night Sensitivity, Night to Day
Sensitivity and IR Light Brightness for the analog cameras.
 Select the Day/Night Mode of the camera from the drop-down list.
 Check the WDR Switch checkbox to enable the function of the camera.
Step 4 (Optional) Click Default to set the parameters to the default settings.
Step 5 (Optional) Click Copy to copy the parameters of the current camera to other analog
cameras.
Step 6 Click Apply to save the settings.
Note:
 The camera parameters settings is only applicable for ananlog cameras.
 The 4 MP/5 MP Signal Switch, Defog, Day to Night Sensitivity, Night to Day
Sensitivity, IR Light Brightness, Day/Night Mode, and WDR Switch functions must be
supported by the connected analog camera. You cannot set the parameters if the
connected analog camera does not support them or there is no video signal.
 The parameters are saved to the connected analog camera and are not saved to the
DVR.
 The default value of Day to Night Sensitivity, Night to Day Sensitivity and IR Light
Brightness is 5. The effective value ranges from 1 to 9.
 If you exit from the interface and enter it again, the parameters displayed are those
you have set the last time.
 The DVR connects to the analog camera via coaxitron and there is no response
mechanism. Even if the coaxitron is abnormal, the parameters are still displayed to
be set successfully.
191