Table of Contents
Advertisement
Step 8 Click Apply to save the settings.
Note:
The sudden scene change detection and the intrusion detection cannot be enabled at the
same channel.
10.5 Region Entrance Detection
This function may not be available in each recorder model.
Region entrance detection function detects people, vehicle or other objects which enter a
pre-defined virtual region from the outside place, and some certain actions can be taken
when the alarm is triggered.
Step 1 Go to Menu > Camera > VCA.
Step 2 Select the camera to configure the VCA.
You can check the checkbox of Save VCA Picture to save the captured pictures of
VCA detection.
Step 3 Select the VCA detection type to Region Entrance Detection.
Step 4 Check the Enable checkbox to enable this function.
Step 5 Click
to configure the trigger channel, arming schedule, linkage action and PTZ
linking for the region entrance detection alarm.
Step 6 Click the Rule Settings button to set the sensitivity of the region entrance detection.
Sensitivity: Range [0-100]. The higher the value is, the more easily the detection
alarm can be triggered.
Draw Area for Intrusion Detection
141
Advertisement
Table of Contents
