8.2 Setting Sensor Alarms
Set up handling method of an external sensor alarm.
Step 1 Go to Menu > Configuration > Alarm > Alarm Input.
Step 2 Set the handling method of the selected alarm input.
Check the Enable checkbox and click
Step 3 Select Trigger Channel tab and select one or more channels which will start to
record or become full-screen monitoring when an external alarm input is triggered.
Step 4 Select Arming Schedule tab to set the channel's arming schedule.
Select one day of a week and maximum eight time periods can be set within each
day.
Note:
Time periods shall not be repeated or overlapped.
Step 5 Select Linkage Action tab to set up alarm response actions of the alarm input
(Refer to Chapter 8.7 Setting Alarm Response Actions).
Alarm Input Settings Interface
Set Arming Schedule of Alarm Input
117
button to set its alarm response actions.